4 wire lid switch bypass Maytag

Even AFTER you've installed a new switch and latch, it will still do this if the WATER to the washer is turned OFF, or if there's not enough water pressure; there's a pressure-activated switch inside the washer that won't lock the door until it senses water pressure to the washer.

Check your supply water pressure, or even better, turn the water ON! You'll either be rewarded or know there's something else wrong deeper inside the machine.

Also, depending on the Amana model, this switch can have 2, 3, or 4 wires, and CANNOT BE BYPASSED BY "HOT WIRING A COUPLE OF WIRES TOGETHER" the way you could with the older washers where the switch was a simple on/off job.

These new ones have a sensor back inside the body with the controls, and if the sensor's not happy, the washer doesn't turn on.

Turn the water on, if it doesn't work, replace the switch and latch assembly, if it still doesn't work, take it to the shop. They have a tester there that gives the technician the error code he needs to fix the machine. Yeah, just like computers!

Give me a 10-year-old, non-computerized Whirlpool or Maytag any day!

Aloha, Tim........

Jake

Appliance Tech - Admin

Staff member

• #2

Hi LaneK,

I don't see a way to bypass this lid switch. You'd need to replace it.

Here's the lid switch for your model:
WP22003804 Switch-Lid

It's in-stock here:

Jake

Jake

Appliance Tech - Admin

Staff member

• #4

Glad to help, let us know how it goes.

Jake

If you have a Maytag washer, you may be familiar with the lid lock issue. This problem prevents the washer from spinning because the lid is locked in place. But don’t worry – there is a way to bypass this lock and get your machine up and running again. In this post, we will show you how to do it. So keep reading for more information.

Contents

• 1 Maytag Lid Lock Bypass
• 2 Maytag Washing Machine Lid Switch Bypass
• 3 Will Washer Work Without Lid Lock?
• 4 How Do You Bypass The Lid Lock On A Washing Machine?
• 5 How Do I Reset My Maytag Washer Lock?
• 6 How do you manually unlock a Maytag top load washer?
• 7 Final Words
  • 7.1 Share this:
  • 7.2 Related

Maytag washer lid switch bypass is a great way to keep your washing machine from becoming damaged. The Maytag washer is one of the most popular brands and is known for its quality and durability. However, one of the most common problems with Maytag washers is that the lid switch can become damaged, making it difficult to open and close the lid.

Maytag lid lock bypass is a simple and effective way to prevent this problem from occurring. Bypassing the Maytag lid switch is a relatively easy process that anyone can do, and it only takes a few minutes.

Once the Maytag lid lock bypass is in place, you will be able to open and close your Maytag washer without worrying about damaging the lid switch. Maytag washer lid switch bypass is essential for keeping your Maytag washer in good working condition.

Maytag Washing Machine Lid Switch Bypass

If your Maytag washing machine isn’t starting up, it might be because the lid switch is faulty. Fortunately, there’s a way to bypass the lid switch so that you can still use your machine. Here’s what you need to do:

First, locate the switch. It’s usually located near the top of the machine, behind the control panel. Once you’ve found it, unplug the machine from the power source.

Next, use a small screwdriver to remove the screws that hold the switch in place. Be careful not to lose them!

With the screws removed, you should be able to pull the switch out of its housing. At this point, you can either replace it with a new one or simply disconnect it completely.

If you choose to disconnect the switch, you’ll need to jump the two connected wires. One wire will be connected to a green terminal, and the other will be connected to a black terminal. You can use a paperclip or a wire to make the connection.

Once you’ve made your connection, reassemble the machine and plug it back in. Your Maytag washing machine should now be operational without the need for

Will Washer Work Without Lid Lock?

It’s always a bummer when you’re in the middle of doing laundry, and you realize that your washer doesn’t have a lid lock! Or, maybe you just moved into a new place, and your washer doesn’t have one either. Can you still use the washer without a lid lock? The answer is yes, but there are a few things to consider.

First of all, without a lid lock, your washer is more likely to vibrate and shake. This can cause issues with the washer over time and may shorten its lifespan. Additionally, small items like socks or coins can fall out of the washer without a lid lock while it’s running. You’ll need to open the washer to retrieve the item if this happens, which can be a pain.

Finally, your washer is more likely to leak water without a lid lock. So, if you’re going to use your washer without a lid lock, keep an eye on it during the cycle to make sure everything is running smoothly.

How Do You Bypass The Lid Lock On A Washing Machine?

One way to bypass the lid lock on a washing machine is to use a putty knife. Wedge the putty knife into the crack between the door and the machine. Apply pressure to the putty knife until the door pops open. Another way to bypass the lid lock is to remove the screws that hold the lock in place.

Use a screwdriver to remove the screws, then pry the lock off the door. Once the lock is removed, you should be able to open the door. If neither of these methods works, you may need to call a repairman.

How Do I Reset My Maytag Washer Lock?

If you have a Maytag washer with a lock, you may be wondering how to reset it. The process is quite simple. First, locate the control panel on your washer. Next, find the reset button. This will usually be located near the power button. Once you have located the reset button, press and hold it for three seconds.

After three seconds have passed, release the button, and your washer should be reset. If you have any further questions about resetting your Maytag washer, consult your owner’s manual or contact customer service.

How do you manually unlock a Maytag top load washer?

If your Maytag top load washer isn’t unlocking, there are a few things you can try. First, remove the top panel of the washer. Once you’ve done that, you should be able to reach down and pull the tear-shaped tab at the bottom of the door lock.

This will unlock the door. There is also a green plastic rope or string located near the detergent area on some models. If you pull on this, it will also unlock the door. If neither of these methods works, you may need to consult your owner’s manual for further instructions.

Final Words

If you are experiencing the same issue with your Maytag washer, there is a way to bypass the lid lock and complete your wash cycle. The instructions for doing this can be found at the link below. Hopefully, this will help you get your laundry done quickly.

How do you trick a washing machine lid switch?

Is it safe to bypass washer lid switch?

Are washer lid switches Universal?