How do you perform a 3

One of the hardest hurdles of a driving test is the three-point turn test, which most trainees fail to cross at one go. But the irony is that the examinees MUST pass this test to stand any chance of obtaining a licence.

Therefore, you must enroll yourself in a reputed driving school, which is home to some of the best driving mentors. These professionals will teach you thoroughly how to crack the three-point turn test in the first attempt.

Here is why a driving school like Academy Of Driving Excellence will provide you with thorough driving lessons in Melbourne regarding the tactics of three-point turn and help you out in this aspect.

However, all said and done, it will be handy if you have a fair bit idea of how to conduct a three-point turn successfully. There are 6 steps to perform that turn successfully. You can practice the steps religiously, to crack the test at one go.

Step 1: Moving to the Outer Side of the Lane

As you close into the three-point turn area where you have planned to practice the manoeuvre, move to the outer side of the lane. This will give you more room for maneuvering the vehicle.

Step 2: Stopping

Now you need to stop. However, before you stop check out for any traffic through the rearview mirror. However, any mentor giving you driving lessons in Melbourne Northern Suburbs will tell you, never try a three-point turn in heavy traffic. You are to use this tactic only in case of emergencies. Hence, it is always a safer option to practice it on an empty driveway or a broad and expansive parking lot for the turnaround.

Step 3:

Check out for other vehicles ahead of and behind you
Stop and again, check if there is any traffic or person ahead or behind your car. It will take quite a few seconds for you to perform the task completely.

Do not cause any obstruction in the road for the other vehicles, more so when you are performing it for mere practice, and not because of any emergency.

Step 4 (Point 1):Turning entirely to the left

After putting your vehicle to a complete halt, and when you are sure that there are no other vehicles around, you need to turn the wheel all the way to left, and accelerate the car, till it gets to the opposing lane’s edge. Once you have reached, the 1st point is done with.

Step 5 (Point 2): Shifting to the Reverse

Now, you have to shift entirely to the reverse, by turning your wheel rightwards and then backing up towards that side of the road, from where you initially stared. You need to keep an on the rear, and the side-view mirrors, as you slowly turn the vehicle rightwards. This is the 2nd point.

Step 6 (Point 3): Shifting Back to the Forward and Then to Left

Now, recheck if there is an approaching vehicle. Once you have checked, shift your car back to forward and then steer it left, so much so that you can drive in the lane that lies opposite the one from where you started. This is the 3rd point, and this ends the three-point manoeuvre.

So you see, the 3-point turn is not rocket science. It is just that you need practice and good coaching. You will get that if you find out a right driving school by using the keyword, ‘driving lessons Melbourne near me’. It will get you to Academy Of Driving Excellence, which is one of the best school that gives you driving lessons in Melbourne at pocket-friendly prices. For further details, call us at 425749703 during our business hours.

How do you perform a 3
Whether you are preparing for your driving test or just want to brush up on your knowledge, knowing how to perform a three point turn is an essential skill. It’s also one of the most common manoeuvres you will be asked to perform during your practical driving test together with parallel parking.

Here are the steps you need to take to do a three point turn safely.

What Is a Three Point Turn?

If you are going in the right direction and you don’t have enough space for an U-turn, then a three point turn is your best option if you want to turn safely.

A three point turn is a manoeuvre that allows you to turn your vehicle by turning the steering wheel and moving the car three times (hence the name.)

It’s a difficult and hazardous manoeuvre that requires the driver to go to the other side of the road and reverse the car to get it straight again. Throughout this, it will require checking both sides of the road and indicating. Add to it the fact that you need to drive in the opposite lane and in the opposite direction to complete the manoeuvre, and you understand why it’s critical to be able to perform a three point turn safely.

How to Do a Three Point Turn

  • Pull Over the Left Side of the Street

Before you do a three point turn, make sure to check for traffic and double check your blind spots to ensure you have plenty of room to perform the manoeuvre safely.

  • Turn the Steering Wheel to the Right

After you’ve ensured that there are no road users, signal and turn the steering wheel all the way to the right. Then turn across the road to the kerb on the other side without touching the kerb.

  • Turn the Steering Wheel All the Way to the Left

Next, check the roadway to the right and left. Look over the left shoulder, turning the wheels to the left and while in reverse gears proceed back as far as necessary to be able to clear the kerb on the next forward movement.

  • Turn the Steering Wheel Right and Straighten the Car

Turn the steering wheel right again to straighten the vehicle, check for traffic and proceed into the correct lane.

Preparing for a Three Point Turn for Your Driving Test

The testing officer will likely ask you to perform a three point turn during your test. Practice as often as possible to get comfortable with the manoeuvre. During the test, take your time, checking your mirrors and the traffic frequently. The testing officer doesn’t care how fast you turn, but if you do it correctly and safely.

Can We Help?

If you need more help preparing for the test or improving your skills, at our driving school you will find over 80 instructors ready to deliver the highest quality.

Contact us now if you want to learn more about our school and how choosing LTrent can benefit you, or book a lessons today to practice your 3 point turns.

Book Driving Lessons

How do you perform a 3 point turn?

You only need to use the indicator to pull into the kerb initially (to the left) and then when you move away from the kerb to begin the turn (to the right). You do not need to indicate for any other direction changes during the three-point turn.

How do you perform a turnabout?

What is a turnabout in driving?.
Step 1: Turn on your right turn signal and slow down. ... .
Step 2: Signal left and wait until the traffic is clear in both directions—and will remain clear for at least 20-30 seconds..
Step 3: Make a left turn with your vehicle to face the curb on the other side of the road..

How do you do a 3 point turn on a K53?

K53 Three Point Turn | Instruction Video.
Drive to the corner (point A).
Reverse to the corner(point B).
Drive to the exit(point B).