Show
You are using an out of date browser. It may not display this or other websites correctly. Troubleshooting first-time use of WiFire on PRO 575
JoinedMar 23, 2020Messages1 Reaction score0Points1Location Las VegasGrill Pro 575 Hi, I am trying to connect the WiFire for the first
time on my PRO 575 Series. The farthest step I got was a "Software Update". However, I am not sure if it finished because I eventually got a connection issue and haven't been able to connect still. I keep getting a message that says, "Your Grill cannot find Traeger-C449," if I connect to the Trager Wifi in my iPhone. Then, when I check the WiFi Information on the Traeger, it says "WiFire Access Point DEVICE CONNECTED to Traeger-C449" when I connect to the Traeger-C449 in my
iPhone's WiFi. However, it won't connect to the app. Or, I get the message when I am connected to my home WiFi network: "Unable to Connect to Grill. Your phone wasn't able to connect to your grill please make sure the grill is on and that it is not curretnly connected to a WiFi network. On the grill, check the WiFi settings by going to Menu -> WiFi settings. If you grill is connected to a WiFi network, you can remove it from your grill by Forgetting WiFi settings". I also tried
to follow directions to "Forget the Wifi" on my Traeger. However, there is no option for that under the settings or the Wi-Fi Information on the Traeger. I have also ensured that my home WiFi was on a 2.4GHz network. And, I moved it close to my router, as well. Also tried shutting down and restarting, as well. Lastly, I tried the Store Demo option, which was supposed to restart the system, but nothing happened. According to the website, I believe my firmware is updated on the
system. It shows the following: Any advice? Thanks so much.
JoinedNov 22, 2019Messages74 Reaction score28Points18Location NCGrill Pro 780 what device are you using app(Apple,Android..etc..) Apple latest app is Ver.
1.4.3(2)
JoinedJan 4, 2020Messages319 Reaction score260Points63Location AustraliaGrill Traeger 575 I fired up the my 575 for the first time in 5 weeks
and couldn't connect to the Wifire. Eventually after deleting and re-installing the app I made the connection. But when I wanted to change the temp from my iPhone the app shut down and I had to re-start it. So still a few problems to fix yet I think.
JoinedJan 16, 2020Messages42Reaction score15Points8Location TXGrill Pro 575 Hi, I am trying to connect the WiFire for the first time on my PRO 575 Series. The farthest step I got was a "Software Update". However, I am not sure if it finished because I eventually got a connection issue and haven't been able to connect still. I keep getting a message that says, "Your
Grill cannot find Traeger-C449," if I connect to the Trager Wifi in my iPhone. Then, when I check the WiFi Information on the Traeger, it says "WiFire Access Point DEVICE CONNECTED to Traeger-C449" when I connect to the Traeger-C449 in my iPhone's WiFi. However, it won't connect to the app. Or, I get the message when I am connected to my home WiFi network: "Unable to Connect to Grill. Your phone wasn't able to connect to your grill please make sure the grill is on and that
it is not curretnly connected to a WiFi network. On the grill, check the WiFi settings by going to Menu -> WiFi settings. If you grill is connected to a WiFi network, you can remove it from your grill by Forgetting WiFi settings". I also tried to follow directions to "Forget the Wifi" on my Traeger. However, there is no option for that under the settings or the Wi-Fi Information on the Traeger. I have also ensured that my home WiFi was on a 2.4GHz network. And, I moved it close to
my router, as well. Also tried shutting down and restarting, as well. Lastly, I tried the Store Demo option, which was supposed to restart the system, but nothing happened. According to the website, I believe my firmware is updated on the system. It shows the following: Any advice? Thanks so much. That may well be your problem. I spent months trying to get my Pro 575 grill/app/wifi to connect. It was fine until the software update hit (v-2.0) then nothing worked. Finally Traeger sent me new controller and that fixed the problem. Seems some of the controllers died during the update. The way Traeger knew it was the controller was the missing menu option that you described. You may be in the same boat I was in.
JoinedApr 20, 2020Messages2Reaction score0Points1Location MinnesotaGrill Pro 575 First time poster here. Had a pretty rough go with my wifire until tonight. I have a Pro 575 that is just about a year old. Wifire was working until they pushed a firmware update. Then, as others have experienced, it would not connect. It wouldn't even show any signal to my wifi. No changes on my end with my router, connection, etc. It was 100% the Traeger. But tonight, I was able to get it to
connect. I'm not sure what it is/was, but I'll tell you what all I did in hopes that it may help you. I'm using a Google Pixel 2 XL. 1. Uninstalled the app and reinstalled (no change) After I did #9, the grill immediately connected to my wifi network, and immediately started downloading an update. I won't lie....I was excited and nervous at the same time. After all, the last time it did this, it fritzed out. But it downloaded and installed the
updates and my phone now connects to the grill via wifire. Few interesting notes.....when I was in the WiFi Information menu before the updates, I did not have the option to forget the Wireless Network (on the grill menu). I only had the "Back" option. After the update, I once again had the option to forget the Wireless Network (on the grill). Another note is that before tonight's update, I had SW VER 02.00.01 and CONFIG VER: 04.012. After the update, I now have VER 02.01.00 and CONFIG VER 04.016. I also had the older app on my phone. It did not update to the new one until after I uninstalled it and reinstalled the app. I'm not sure if it was one thing that caused things to work, or a combination of things. But I figured I'd share in hopes that it gets someone back into the smokey righteousness that they should be in. Traeger PhotosTraeger Photos
How do I reset the WiFi on my Traeger Pro 575?Please take the steps below:. Turn on the grill and press the Menu button.. Scroll down to the WIFI INFORMATION. Press the knob to confirm selection.. While on the WiFi Information Screen, press and hold the Ignite button for 10 seconds.. Power Cycle the grill. Turn off and unplug the grill.. Why can't I connect my Traeger to WiFi?Check if the grill is already paired.
On the grill's controller, navigate to Menu > Wifi Information. If there is a WiFI network name here, the grill is already paired to a network. If the grill is connected to the correct WiFi on the controller, but is not connected within the app, go to Grill Appears Offline in App.
How do I connect my Traeger to my phone?Connecting Your Traeger Grill to WiFi - Android. Open the Traeger app and select, + Add WiFIRE Grill.. Select the controller that matches the one on your grill.. Select your grill model.. Review and agree to Traeger's data and privacy conditions.. Why won t my Traeger connect to my phone?Restart the pairing process by verifying your grill's network name and password are entered correctly. The grill network name looks like “Traeger-XXXX” where “XXXX” can be any combination of letters and numbers. Grill WiFi password looks like “WIFIREYYYY” where “YYYY” can be any combination of numbers.
|