How to get into a locked Motorola phone

Surely you have ever found yourself in this situation, that of finding your Motorola mobile completely locked and without the possibility of doing anything with it. You might have forgotten the lock, the PIN, the smart lock, or the screen lock not working. Probably, you might have bought a second-hand phone and tried to unlock it. But how to reset Motorola phone when locked? In this article, we’ll find out the ways you can use to reset the Motorola phone.

Part 1. How to Perform Motorola Factory Reset PIN

This Motorola pin code bypass method should only be done if you have enough experience in handling the Android system. During the hard reset, all your essential data will be wiped out. So, we recommend that you take necessary actions and backup the data before following the below steps.

Step 1: Check the battery status

As the first step, it is important to check the battery percentage to start the process. It is recommended to have at least 30% of the battery charge. Once you confirm that, please turn off the phone.

Step 2: Enter the recovery mode

To enter the recovery mode, you need to simultaneously press and hold the Volume Down button and Power button. Keep holding the buttons until the Motorola logo appears on the screen.

After that, press the Volume Down button again to enter the recovery mode.

Step 3: Start Factory Reset

After entering the recovery mode, you can use the Volume Up/Down buttons to navigate through the list. From the list, select the Wipe data/factory reset option and press the Power button. After pressing it, select the Factory data reset option and wait for the process to complete.

Step 4: Reboot the device

Now use the Volume Up/Down buttons to select the Reboot system now and wait until the device restarts. After restarting the device, you will find an unlocked phone.

Part 2. How to Unlock Motorola Phone without Password/Google Account

For someone with a less technical background might find the method mentioned above hard to perform. Also, using the recovery mode can ultimately damage the hardware if performed incorrectly.

So to avoid this kind of user issue, iTubeGo has introduced a fantastic tool, iToolab UnlockGo (Android), to support the removal of any screen locks, including PIN, Pattern, Password, and Fingerprints. Some of you might have forgotten the Google account password and thinking about how to unlock a Motorola phone without the password. But with the introduction of UnlockGo, the password is no longer required to bypass the Motorola screen lock.

How to unlock the screen with UnlockGo

Step 1: Download and Install the UnlockGo

The first step is to download and install the UnlockGo for Android on your PC. Then connect your Motorola phone with the PC using the USB cable. Open the software and click on the Unlock Screen Lock option in the home window.

Step 2: Verify device information

Once you connect the device and select the screen to unlock option, you need to confirm the Motorola device information in the next window. From the list of brands, make sure the correct brand is selected. Then click on the Unlock button.

Step 3: Enter the recovery mode

There are different process for devices with/without a home button to enter the recovery mode.

Step 4: Initiate the unlocking process

Once you enter the recovery mode, you can follow the instructions on the screen to start the unlocking.

Step 5: Finalize the process

After restarting the device, you will find the screen is unlocked in your Motorola phone.

Part 3. How to Unlock Motorola PIN Code without Data Loss (Third-party Lock)

If you are a user who has used a third-party app to lock the screen, you might need to enter the mobile into the Safe mode to remove the screen lock. This is one of the solutions to answer how to unlock a Motorola phone without a password.

Boot into safe mode

Step 1: Turn off the device and press and hold the Power button until the Motorola logo appears on the screen.

Step 2: Once the logo appears on the screen, press, and hold the Volume Down button for a few seconds. If the Volume Down button is pressed early, you won’t enter the safe mode.

Step 3: Keep holding the Volume button pressed until you see the transparent Safe mode letters appear on the screen. This would take around 45-60 seconds.

Delete the third-party screen lock App

Once you enter the Safe mode, the third-party lock will be automatically disabled. At this point, you can reset the data, clear the cache or remove the third-party lock app. By doing this, you will remove any existing data that causes the screen to lock.

Turn off safe mode

After clearing the required data, turn off the device by pressing and holding the Power button for a few seconds. This will automatically turn off your device. After that, reboot the device, and you will no longer be in the Safe mode.

Summary

In recent times many users questioning how to reset Motorola phone when locked, how do I unlock my Motorola phone if I forgot my password etc. The sole intention of UnlockGo for Android is to provide answers to these types of user issues. We believe throughout the article; we have provided you with multiple solutions to cater to different types of users. We recommend you download and try UnlockGo (Android) for any issue relevant to your Android device.

How do I unlock my Motorola phone if I forgot the password?

What is the master code to unlock any phone?

Is it possible to unlock Motorola phone?

What is the master unlock code for Motorola?