How to make popsocket sticky again

Did you know there are over 3 million PopSockets in circulation? Did you also know that there are also over 3 million people asking How To Remove PopSocket Adhesive? That’s right; everyone wants to know how to get rid of the adhesive.

We all love the PopSockets, but no one likes the sticky residue it leaves behind. Many of us have Googled ways to remove it and found nothing useful.

Well, almost nothing – we read so many ridiculous answers, including putting it in your freezer or washing it with dishwashing liquid and bleach. Don’t try these at home! We found some useful tips, listed below, that will help you remove this adhesive easily.

What I'll Cover

How To Remove PopSocket Adhesive?

Remove PopSocket Sticky Adhesive With Business Card

Business cards are an excellent way to remove a PopSocket. The thin card can slide between the adhesive and the phone, allowing you to slowly peel it away. You can also use a business card to remove lint or debris that might be stuck to the adhesive.

If the PopSocket is still firmly attached, you can try using a hairdryer to heat up the adhesive. This will make it easier to remove. Start with the hairdryer on the low setting and hold it about six inches from the PopSocket.

Move the hairdryer back and forth over the area for about 30 seconds. Then, try to remove the PopSocket again. If it’s still not coming off, repeat the process.

Once the PopSocket is removed, you can clean the adhesive off your phone with rubbing alcohol. Rub a cotton ball soaked in alcohol over the area until the adhesive is gone.

Get Rid Of PopSocket Sticky Adhesive With Duct Tape

You read that right. Duct tape is your best friend when it comes to removing PopSocket adhesive. It will even work when the PopSocket is still on your phone. Just tear off a piece of duct tape, then place it over the PopSocket and pull.

The adhesive should come off easily, but there might be some residue left. To remove that, place another piece of duct tape over the adhesive and pull again. Repeat until the adhesive is completely gone.

The duct tape acts like a sponge and absorbs the adhesive, which is great if there’s a big surface area to clean. This method will also work with any other sticky products.

Did you ever notice that they are always covered in a blue or silver substance? That’s duct tape! This sticky substance is used to keep the sticky stuff in place.

Use Baking Soda To Remove PopSocket Sticky Adhesive

You can always use baking soda to remove 3M adhesive and get rid of PopSocket sticky adhesive. All you have to do is get some baking soda and sprinkle it generously over the PopSocket.

Then, brush off the baking soda with a toothbrush. Make sure to get all sides of the PopSocket, including any residue left on your phone’s surface. To finish it off, wipe the PopSocket and your phone’s surface with a damp cloth.

This method can also be used to clean sticky substances off other surfaces, such as glass and plastic. Unfortunately, this method won’t work if there’s a large surface area to clean.

Use Isopropyl Alcohol To Remove PopSocket Sticky Adhesive

Isopropyl alcohol works great on PopSocket sticky adhesive. Just spray the PopSocket and wipe it with a cloth. If there are some spots you can’t reach with the cloth, you can use a cotton swab to wipe those areas.

Make sure to wash your hands after using the alcohol so you don’t get dermatitis. This method is best if there is only a small surface area to clean. You can also use alcohol to clean sticky substances off other surfaces, such as glasses and plastics.

Try Greasing Up Your Hands Before Inserting A PopSocket

Next time you want to insert a PopSocket, try greasing up your hands. This will make the PopSocket slide in much easier and stop it from getting stuck.

This is especially useful for those who like to stick their PopSockets on the back of their phone cases. Make sure you don’t put too much grease on your hands though.

This method is best if there is only a small surface area to clean. Make sure you clean your hands thoroughly after using the grease so you don’t get dermatitis.

Use Nail Polish Remover To Get Rid of The Sticky Adrobe

Nail polish remover does a great job at dissolving PopSocket sticky adhesive. Just pour a generous amount of nail polish remover on the PopSocket and wipe it off with a clean cloth.

If there are some spots you can’t reach with the cloth, you can use a cotton swab. Just make sure to wash your hands after using the nail polish remover so you don’t get dermatitis.

This method is best if there is only a small surface area to clean. Make sure you clean your hands thoroughly after using the nail polish remover or you might get dermatitis.

Does PopSocket leave a sticky residue?

PopSockets are a popular phone accessory that many people use to make it easier to hold their phone. They have a circular, rubbery grip that you can stick to the back of your phone.

They also have a collapsible stand that you can use to prop your phone up. PopSockets come in many different colors and designs, and they are fairly affordable.

One question that people often ask is whether or not PopSockets leave a sticky residue on the back of their phone. The answer is that it depends on the type of adhesive used in the PopSocket.

Some PopSockets use an adhesive that leaves a sticky residue, while others do not. If you are worried about this, it is best to test out the PopSocket before purchasing it to see if it leaves a residue on your phone.

Does a PopSocket ruin your case?

Using a PopSocket can ruin your case. If you have a thin case, the PopSocket can stretch it out and make it loose. If you have a heavy-duty case, the PopSocket can add too much weight and put stress on the seams.

So before you buy a PopSocket, think about what type of case you have and whether or not it will be ruined by the addition of this popular accessory.

Last Opinion

We hope you learned a thing or two about PopSocket adhesive. We also hope you learned the best way to remove PopSocket sticky adhesive from your phone and other surfaces. So are you ready to get rid of it? There’s no doubt that PopSockets are great for a variety of things.

They can hold your phone upright, protect it from falls, can be used as a tethered stand, and so much more. But did you know that using a PopSocket can also lead to some problems? And by problems, we mean PopSocket sticky adhesive.

The thing is, the adhesive is very strong and hard to get rid of. This sticky substance can easily get on your phone’s surface and the only way to get rid of it is to use a sticky substance to get rid of it.

These methods are best if there is only a small surface area to clean. So what do you say? Are you ready to get rid of the PopSocket sticky adhesive?

Do PopSockets lose their stickiness?

How many times can you reapply a PopSocket?

What kind of glue to use on PopSocket?