Samsung note 10 moisture detected wont go away

Did you get troubled with an error message on your phone’s screen that states “s10 moisture detected” or “s10e moisture detected”?

Worried why such kind of error occurs and how to bypass Samsung moisture detected won’t go away?

If your answer is yes, then just don’t panic.

These days if you look at Smartphones then almost all are coming with waterproof designs.

Samsung has launched its new flagship smartphones named as Samsung Galaxy S10/S10+/S10e, S20, S21 series and they are water resistance devices.

These devices will be safe when a tiny amount of water is dipped on them. When the phone gets wet then all you need to do is to wipe out the water from it.

But there are still some chances to get you in trouble with your phone and that is all because of “moisture detected”.

So I have come up with some of the best ways to fix “moisture has been detected” error on Samsung Galaxy devices.

Expert recommended:

Use Android Repair tool to fix “Moisture detected” error on Samsung/Android and other errors with one click.

Below is the list of Samsung phones and tablets that are made of water resistance and withstand dust.

• Samsung Galaxy S series: S7, S7 Edge, S8, S8 Plus, S9, S9 Plus, S10e, S10, S10 Plus, S20, S20 Plus, S20 Ultra, S21, S21 Ultra
• Samsung Galaxy A Series: A30, A50, A80, A8, A8 Plus
• Samsung Galaxy Note series: Note 8, Note 9, Note 10, Note 10 Plus, Note10+ 5G, Galaxy Note 20, Note 20 Ultra 5G
• Samsung Galaxy Tab series: Tab A, Tab Active 2, Tab Active Pro

What reasons lead to Moisture in Galaxy phones?

The best part of water resistance phones is that not even a tiny drop of water will enter into the internal part of the device and can damage it.

But other parts of the phone like the charging ports, headphone jacks, USB ports have a chance to get dipped in water or can show the error on the phone.

When moisture gathers in the charging port then the contact point gets damage.

It then stops the phone to charge and the damage will be long-term.

In fact, several users have reported that their phone is not water damage but still they face moisture issues.

This is because if you live in a humid area then moisture in the air damages the charging port. Even the charging cable can be the fault.

After knowing the causes behind the moisture detected issue, now it’s time to check out some of the best ways to bypass moisture detected s10 error.

Follow the below solutions selectively and see which one works for you.

Quick list of solution

• Best Way To Get Rid Of Moisture Detected Error on Samsung Galaxy Phone
• Check your device is actually wet?
• Switch off the phone and charge it
• Ensure your phone is not a liquid damage
• Dry the wet port using a hairdryer
• Clear data of USB Settings service
• Use wireless charging
• Use a computer to charge your phone
• Avoid ‘moisture detected’ warning
• Restart your device in Safe Mode
• Change charging cable
• Put Galaxy phone in a rice bag
• Disable Fast Charging
• Force stop Android System
• Do a factory reset of your phone

Method 1: Best Way To Get Rid Of Moisture Detected Error On Samsung Galaxy Phone

The very first method that I am going to suggest you fix the Galaxy S10 moisture detected error is using Android Repair. This is a unique and amazing tool that helps to bypass moisture-detected S20, S10, S10+, and S10e Galaxy phones.

The tool is easy to use and it can solve any kind of issues or errors on Android and Samsung phones.

It can work effectively on any Android phone without any further issues. It has resolved other Android errors as well as Android apps keep crashing, Android Setting has stopped, Samsung stuck on black screen, etc.

So simply Download Android Repair software and fix Samsung moisture detected won’t go away with ease.

Follow The Steps To Get Rid Of Moisture Detected Galaxy S10/S10+/S10e Phone

Method 2: Check your device is actually wet

Samsung Galaxy phones come with a “Moisture detected” indication and it occurs when the charging port becomes wet.

So if you are getting the error then it may be because you have used your phone in wet or humid conditions.

Therefore,

First, you need to dry your phone completely. After this, check whether the charging port is free of moisture or not.

When your device port is wet then the Galaxy phone will give you enough warning of it. In fact, if you try to connect your device then an alarm will tell you to disconnect your phone.

It means that your phone still needs to dry.

When the temperature becomes normal then whatever water remains in the device will evaporate within hours.  Even you can use a soft cloth to dry the port fast.

Method 3: Switch off the phone and charge it

Another important and easy solution to fix the ‘Moisture detected’ issue on Galaxy S20, S10 is by switching off the phone and then charge it.

Basically, the battery needs to be checked properly to fix the issue but when your device doesn’t have any power left then you will not be able to do anything.

But going through this process will be easy to charge your phone as well as it will also bypass the error messages because unless you turn on your phone, you will not see the error message.

Method 4: Ensure your phone is not a liquid damage

In this, you have to check the Liquid Damage indicator. For that, you have to follow the below steps:

Step 1: First, remove the SIM card tray and then search for a small sticker in the SIM slot

Step 2: If the sticker is white then the phone is completely safe from liquid damage. But when the sticker becomes red, pink, or purple then ensure your phone has got liquid damage.

In this condition, you have to take your phone to the service center.

Method 5: Dry the wet port using a hairdryer

A hairdryer can help you to tackle the situation better because it can dry the wet part from the port.

The thing is not going to be easy but you can bypass moisture detected S10 via a hairdryer.

Remember to keep the temperature low of the hairdryer as you have to think of the port as well. It’s better to keep the level to 1 or 2 so that only moisture gets dry.

You can use it for 2-3 minutes and after that, take a dry cloth to wipe the moisture if possible.

Method 6: Clear data of USB Settings service

In many cases, the error is not hardware-related but a problem with a USB port. However, this type of case is rare and the factory reset has helped it.

But to get out of the situation, you can simply clear the data of the USB settings app and check if it helps to solve the error.

• First from the Home screen, move to the left empty spot to open Apps try
• Now click on Settings > Apps
• Here you have to find and click USB Settings and then tap on Storage
• At last, you have to click on Clear data and after that, press OK

Method 7: Use wireless charging

Though this is not a permanent fix it’s a way to handle the situation for that time. You can make a way to charge your phone at least. Charging your phone wirelessly will not show the error ‘S10e Moisture detected’.

Going through this process will charge your phone and also one of the best ways to get rid of the error.

Method 8: Use a computer to charge your phone

Even computers can help you to charge your phone and you might know this.  When you get a “Samsung S20 moisture detected error” error message on Samsung Galaxy then make use of the USB cable of the phone and connect it to PC/laptop.

Though the process will be very slow and many users don’t want to take risks with this method. This is because when the port is wet then charging phones via the computer can make the situation even worse.

Method 9: Avoid ‘moisture detected’ warning

Before doing this process, ensure your device is not suffering from any kind of liquid damage, and the charging port is completely clean and dry.

Try to bypass the error and charge your phone completely by following the steps below:

• First, plug your charger into the wall outlet
• Now connect another end of the cable to the charger and another one to the phone

• You will see the warning message immediately when the phone is connected and charging process will pause
• At this moment, reboot your phone and leave your device connected to the charger
• Doing this will allow your phone to charge without any problem after reboot

Method 10: Restart your device in Safe Mode

Several times the error message occurs after you install any app and if it happens then the app is obviously the reason for it.

In case you know the app then remove it immediately.

But when you don’t know which app is creating a problem, in that case, you have to restart your phone in a safe mode. Going through it will disable every third-party app and only the pre-installed app will remain.

If your Samsung Galaxy S10/S10+/S10e charges well in safe mode then ensure any app is the problem.

So follow the below steps to restart your device in safe mode:

• First, switch off your device and press and hold the Power button
• Once “SAMSUNG” occurs on screen, leave the Power key
• Quickly after leaving the Power button, press and hold the Volume Down key
• Now continue pressing the key until the phone complete finishing
• Here you will see Safe Mode in the bottom left corner
• Now leave the Volume Down key
• Here in Safe Mode, try to charge your phone for at least 30 minutes and check

Method 11: Change charging cable

Many times, the charger you are using may become damage and it might lead to such an error. Even if your cable is in contact with any kind of liquid then ensure you clean it before connecting.

Use a cotton cloth or other things that can clean the wet part effectively.

If still the problem exists then replace your charging cable to avoid any kind of severe damage for the long term.

Method 12: Put Samsung Galaxy in rice bag

Now the place you live in has more moisture in the atmosphere then its obvious to face such an issue commonly.

In that case, putting your phone in a rice bag or in silica gel will work. When your phone is wet then keep it for 5-6 hours in a rice bag.

This technique will work for you as it all the moisture will suck from everywhere of the phone. And this will help you not to face any kind of moisture issue on Galaxy phones in the future again.

Solution 13: Disable Fast Charging:

Well, disabling fast charging is also one of the best ways to fix moisture-detected warning messages on Samsung devices.

So, here are the steps on how to disable moisture detected.

• First, go to Settings> Device maintenance > Battery > 3-Dot icon > Advanced settings > Fast charging and turn it off.
• Now, go to Settings> Device care > Battery > Charging and disable Fast charging

That’s it.

Solution 14: Force stop Android System

Another simple way to fix Samsung moisture detected won’t go away is by force-stopping Android system.

For that, you need to follow the below steps:

• First, open Settings and type “Android System” in the search box.
• Now tap on the Android system to open the app info page
• After that, click on Force Stop

That’s it, now try to charge your device and see if any warning message is popping up.

Method 15: Do a factory reset of your phone

Doing a factory reset is not the perfect solution as it erases the data stored on the device, but previously some Galaxy devices require a factory reset to solve moisture detected error.

When all the above solutions do not work for you then doing a factory reset is the last option left.

But doing factory settings is of two types on Galaxy devices. Follow them one by one:

Part 1: Do factory reset of Galaxy using the Settings menu

• First, you have to create a backup of all important data and remove Google account
• Now open the Settings app on the phone
• After that, move down and click on General Management
• Here you have to click on Reset
• Choose Factory data reset from options given
• After reading the information, click on the Reset option continue
• At last, click on Delete All option to confirm

Part 2: How to do a factory reset using hardware buttons

• First, create a backup of all your data in a safe place and if you want to remove your Google account then do it
• Now switch off your device to put your phone in Recovery mode
• Then press and hold Volume Up + Power + Bixby button together
• After the device vibrates then release the Power button

• Here screen menu will occur and you have released the other keys as well
• Now use the Volume Down button unless you get the Delete all user data option. To select it, press the Power button
• Now press the Power button again to choose Yes- delete all user data
• Again press the Power button to highlight and then choose the Reboot option

That’s it…

FAQ:

How do I get rid of moisture detected notification on Samsung?

Lots of solutions are available that can help you to get rid of moisture detected notification on Samsung. They include:

• Clean The Moisture
• Make use of the wireless charger
• Force stop Android OS
• Logout from Samsung account
• Hard reset Samsung phone

Why does my Samsung phone keep saying moisture detected?

Well, moisture detected is designed in such a way so that it can tell the user when the phone gets wet due to any reason. It will give users a warning message to remind them that the phone charging port is wet. While you connect your device, an alarm will tell you to disconnect it.

How do I turn off moisture detection?

To turn off moisture detection option, click on Android system to open app info page and click on Force Stop option. After that, try to charge the device. remember to disable fast charging as it can make moisture detected warning on Samsung galaxy devices go away.

Conclusion

There can be several issues users can face while accessing their phones. However, Galaxy S20, S10/S10+/S10e might throw an error “moisture detected” on your device but there is nothing to get worried off.

This blog completely describes how to fix ‘Moisture detected’ bug on Samsung devices and I hope following the above methods will surely help you to get rid of the problem.

You can further reach us through our social sites like Facebook and Twitter

Harry Jhonson is a technical writer and has experience of 7 years in SEO. He gathers effective solutions to deal with all problems like data recovery, errors, and others related to Android & iOS (iPhone/iPad/iPod Touch) devices.

Why won't the moisture detected won't go away?

How do I get rid of moisture warning on Samsung?