The Beatles Let It Be Vinyl AR 34001 value

I have had in the collection for some time now a record that I thought was an original US pressing of the Beatles Let It Be.

You know the one. It comes in a gatefold cover, red Apple label on the vinyl, catalogue number AR 34001, red Apple on the rear cover:

The Beatles Let It Be Vinyl AR 34001 value
The Beatles Let It Be Vinyl AR 34001 value

The copy I have had for oh, maybe 30 years, looked genuine enough. That is until I read that this is one of the most counterfeited vinyl records of all time…..

When I started to look into it some more I discovered that what I had in my collection was actually a fake.

And it was only two weeks ago, after finally picking up a genuine copy at a record fair, that I could conduct a side-by-side analysis to spot the differences. Here are the tell-tale signs.

Firstly a close-up of the real cover:

The Beatles Let It Be Vinyl AR 34001 value

And here is the illegal copy:

The Beatles Let It Be Vinyl AR 34001 value

As you can see the skin tones on the photo of George Harrison are much more grainy on the fake. Also notice the white borders around each photo. They are much thicker on the counterfeit.

Next, a close-up of the red Apple label. The genuine copy is first, the fake is second:

The Beatles Let It Be Vinyl AR 34001 value
The Beatles Let It Be Vinyl AR 34001 value

Though this is not a definitive decider, the counterfeit label I have lacks vibrancy. It is washed out and dull. Some stock of legitimate pressings may also have a duller appearance – depending on which Capitol plant they were pressed.

The best proof that you have a legitimate copy is in the run-out area of the vinyl itself. There should be the words “Bell Sound” stamped there on both sides (the fake will not have this). It’s difficult to photograph but here goes. First, Side 1:

The Beatles Let It Be Vinyl AR 34001 value

And Side 2:

The Beatles Let It Be Vinyl AR 34001 value

Genuine Let It Be pressings with the red Apple were mastered at Bell Sound by a guy named Sam Feldman and that’s why you can see his initials “sf” scratched into the vinyl above. Fakes don’t have that Bell Sound stamp, but the people who made the illegal copies did try to imitate the originals by including the “sf” initials too.

Furthermore, depending on the Capitol pressing plant they originate from, legitimate pressings will have either the letters “IAM” in a triangle (Scranton PA), an asterisk (Los Angeles CA), or a mark that is supposed to resemble a rifle (Winchester VA). One of these will be stamped somewhere in the run-out area of the vinyl. It should be properly machine stamped on both sides.

As you can see, mine is from the Scranton plant so it looks like this:

The Beatles Let It Be Vinyl AR 34001 value
The fakers tried to imitate this too – but it they did just a crude drawing which you can see here:

The Beatles Let It Be Vinyl AR 34001 value
(By the way, the “IAM” in the triangle stands for the International Association of Machinists Union whose workers ran the pressing plant).

FYI, here is a handy list of the markings from each of the Capitol pressing plants:

The Beatles Let It Be Vinyl AR 34001 value
It was Sam Feldman who also scribbled the words “Phil + Ronnie” on the dead wax. This was for Phil Spector (who produced Let It Be) and his wife, singer Ronnie Spector:
The Beatles Let It Be Vinyl AR 34001 value

Non-legitimate copies also have “Phil + Ronnie” scratched in the play-out area of the disc but the writing is much smaller.

We've owned a record store in California for 21 years and this is the most pristine copy of an original 1971 analog Beatles Let It Be album we've ever bought. The jacket is completely mint and still completely sealed in its original shrink wrap and it has never been opened. It is the same as if you had a time machine and could go back 43 years in time and walk into Licorice Pizza and buy it off the floor. This is the 1970 Apple Records version, catalog # AR 34001. ONCE AGAIN, THIS IS THE ANALOG VERSION, NOT THE REMASTERED VERSION! A customer bought this 43 years ago and never opened it and left it sitting on the same shelf since.

Having a bit of trouble locating my pressing. I believe it is a legit pressing as everything I have found online to identify true pressings notes it as such, BUT it is missing the "Phil + Ronnie" etching. This is a 1970's Jacksonville US pressing with JS-17,500-30 in the A-side runout. I do not see this identifier on any of the US listings. Any idea what pressing this could be, or whether it should be added? I should also add that 'Maggie Mae' is credited to "P.D" without the "Lennon/McCartney" arrangement credit.

How much is the Beatles album Let it be worth?

Let It Be (Parlophone P-PCS 7096) 1970 $1,100 Another very hot Beatles export LP with labels that have the black and silver EMI box at the bottom. Sleeves have a PPCS 7096 catalog number on the spine of the sleeve and a Parlophone logo reproduced on the back cover.

What Beatles vinyls are worth money?

Rubber Soul 1965 Misprint. Another valuable misprint is the 1965 Rubber Soul vinyl from Parlophone. ... .
Abbey Road 1969 Contract Pressing. ... .
"Love Me Do"/"P.S. I Love You" 1962 Demo Single. ... .
Yesterday and Today 1966's "Butcher" Cover. ... .
The White Album First Pressing..

How do I know if my vinyl is valuable?

Ultimately, there are four key factors to consider: how rare the record is, what condition it's in, how old it is, and the current price of similar copies. In the sections below, we'll walk you through all of these factors to help you get a sense of how to evaluate the albums in your collection.

How do you tell if Beatles Let It Be album is original?

It would be on a black label, with white lettering (not black, which is used on recent pressings) circling the bottom of the label. The current price range for an original mono pressing is $50 to $60. You can get $30 to $40 for an original stereo pressing.