Show The control continuously monitors its own operation and the operation of the system. If a failure occurs, the LED will indicate the failure code. If the failure is internal to the control, the light will stay on continuously. In this case, the entire control should be replaced, as the control is not field repairable. Flash sequence codes 1 through 11 are as follows: LED will turn on for 1/4 second and off for 1/4 second. This pattern will be repeated the number of times equal to the code. For example, six on flashes equals a number 6 fault code. All flash code sequences are broken by a 2 second off period. SLOW GREEN FLASH: Normal operation. _______________________________________________________________ York Furnace error codes are seen in three colors, red, green, and amber/yellow. Each color will also flash a specific number of times to signify a specific error. Breaking down each color, and number of flashes, will help you solve the problem you are having with your York Furnace. CODE: SLOW GREEN FLASH CODE: SLOW AMBER FLASH CODE: RAPID RED FLASH CODE: RAPID AMBER FLASH CODE: 4 AMBER FLASHES CODE: 1 RED FLASH CODE: 2 RED
FLASHES CODE: 3 RED
FLASHES CODE: 4 RED FLASHES CODE: 5 RED FLASHES CODE: 6 RED FLASHES CODE: 7 RED FLASHES CODE: 8 RED FLASHES CODE: 9 RED FLASHES CODE: 10 RED FLASHES CODE: 11 RED FLASHES CODE: 12 RED FLASHES CODE: STEADY ON RED CODE: 60-MINUTE AUTOMATIC RESET FROM LOCKOUT CODE: IGNITION CONTROL FLAME SENSE LEVELS What does a red flashing light on my furnace mean?This issue means there is not enough gas or air to keep a steady, hot flame going. This problem could be happening because of clogged filters, a dirty burner chamber and tank, broken burners, or too much pressure in your combustion chambers.
Why is my furnace blinking red 3 times?Have you ever looked at your furnace and thought what do 3 flashes on American Standard furnace mean? This error occurs when the combustion air pressure switch that monitors the flow of air through the vent system fails to close while the induced draft motor is operating.
Should red light be on furnace?The heater's red light being on is a good thing. If it's completely off, the heater has lost power. If you notice the red light isn't on or it's flashing, contact a professional HVAC specialist to pinpoint the reason and make the necessary repair.
|