The unit begins with a brief online lesson to familiarize you with the procedures for backing maneuvers and to explain the precautions required for backing safely. The rest of the unit covers higher level backing theory.
- Correct procedures for backing and parking.
- The position your vehicle should be in before you start to back.
- The correct way to steer an articulated vehicle (tractor-trailer) in reverse.
- The importance of checking the area before backing and of using a guide or helper whenever possible during backing.
- Why backing is dangerous and why you need to avoid all unnecessary backing, particularly blind-side backing.
What You Will Learn:
Backing Principles and Rules
- Steering principles
- Types of jacking maneuvers
- Rules for Safe Backing
- General procedures
Four Basic Backing Maneuvers
- Straight-line backing
- Alley Dock Backing
- Jackknife parking
- Parallel parking
Lesson 01: Principles of Backing Tractor-Trailers
This unit will introduce driver-trainees to the Combination Vehicle Driver Training Curriculum and the components of a combination vehicle.
Tip: These videos are not supported in Internet Explorer. Try another browser; Chrome, Firefox, iphone, Android...
Principles of Backing Tractor-Trailers
There are two important terms you need to know while backing which relate to your steering activity with the tractor. They are "jacking" and "chasing."
Jacking (i.e., jackknifing)
Jacking is employed to change the direction that the trailer wheels are following; that is, you make the trailer jack to the right or to the left depending upon the path you want the trailer to take. The trailer will "jack" in the direction that you turn the steering wheel. If you want the trailer to jack to the right, then turn the wheel to the right.
Chasing (i.e., following the trailer)
Once the tractor has "jacked" the trailer into the path (direction) desired, you then must chase the trailer through its path for as long as you desire the trailer to follow that path. You do that the same way you kept the trailer in a straight path in "Unit 1.4, Basic Control". If the trailer begins to drift off of the curved path, you turn the wheel away from the drift. For example, if the trailer drifts to the left, you turn the wheel to the right. Jacking and chasing are two terms you will be hearing over and over again from your instructor while he or she is teaching you the principles of backing. When the instructor says, "O.K., now give it some jack," he or she is telling you to change the direction of the trailer's path. You do this with the tractor its true, but you are actually steering the trailer. This is why the rear tractor axle is referred to as the "steering" axle when you're in reverse. When the instructor says, "O.K., now chase it," he or she is telling you that you have now "steered" the trailer into the desired path. Then you must "chase" the trailer along that path. Failure to do so immediately will result in the trailer continuing to jack past the intended path. If you fail to chase it, eventually your rig will end in a full jackknife with the trailer against the side of the cab.
When
All jacking and chasing is a matter of when (timing) and how much steering input). If you jack too soon or too late the trailer doesn't steer into the path you want it too. Similarly, if you're too late or too soon in chasing, the trailer will not continue along the desired path. How much--Too much or too little a turn on the steering wheel will start the trailer in the wrong direction. Steering too much or too little, chasing the trailer will cause it to go off course.
Lesson 02: Straight Line Backing
Every backing maneuver starts and finishes with a straight line.
Tip: These videos are not supported in Internet Explorer. Try another browser; Chrome, Firefox, iphone, Android...
Backing the Tractor-Trailer in Straight Line Checklist
1. Put vehicle in position by moving forward until tractor-trailer is aligned and front wheels are straight.
2. Put vehicle in reverse.
- Back as slow as possible (use idle speed).
- Don't ride clutch or brake.
3. Constantly check behind when backing.
- Keep doors closed--always watch both mirrors.
- Make maximum use of mirrors to detect persons/objects crossing into intended path.
4. Steering
5.Pull up and start again if too far out of position.
- Easier to make corrections moving forward (i.e., get the vehicle back in proper position).
- When it is not necessary to stop, pull up and make corrections in steering path.
Download the Straight Line Backing Checklist
Lesson 03: Parallel Park- Blind Side
Tip: These videos are not supported in Internet Explorer. Try another browser; Chrome, Firefox, iphone, Android...
This is a sample course from our training library. You're welcome to view the course for personal use. Drivers of member fleets will receive a certificate after completing the online course. Please sign into your account to take an assignment. A certificate will be delivered electronically to your driver qualification file.
Customer Comments
Dennis Atencio - Director of Safety
Apex Transportation
Bob Bowman - Director, Safety & H.R.
Alpine Lumber Company
Tim Long - Director of Safety
Epes Transport System
© 2010-2016. Safety as a Service. A product of CDL College.
7170 Dahlia St. Commerce City, CO 80022. 303-367-1030