What is the most common size for recessed lighting?

As a lighting contractor, I help homeowners choose between 4-inch and 6-inch recessed lights on a daily basis. The decision can be somewhat stressful, since you don’t actually know how the lighting will look or work until it’s installed.

In this article, I discuss the differences between the two sizes, and how I arrive at my recommendations. I’ve also included decision trees for general, task, and accent lighting to make it simple for you to decide what’s best for your rooms.

3 Common Myths about 4-inch vs 6-inch recessed lights

First off, I’d like to dispel a few common myths when comparing 4-inch to 6-inch LED recessed lights. These have not always been wrong, it’s just that modern LED recessed lights have changed everything.

Myth #1: Only 6-inch lights should be used for general lighting because 4-inch lights are not bright enough.

Fact: A minimum of 600 lumens is recommended for fixtures used for general lighting. In the past, 4-inch fixtures rarely produced that many lumens from the R20 or MR16 incandescent light bulbs they used. But with modern LED technology, most 4-inch LED recessed lights now meet or exceed this specification.

Myth #2: 4-inch recessed lights are too small to be used for General Lighting.

What is the most common size for recessed lighting?
Fact: The spread or distribution of the light is primarily determined by the beam angle of the lens, not the size of the recessed light. In the picture show here, you can see a comparison between a 4-inch and a 6-inch recessed light with the same beam angle. Notice where the cone of light starts at the top of the wall. There’s very little difference (if any) between the two sizes.

Myth #3: You should always use the same size throughout your home.

What is the most common size for recessed lighting?

Fact: Style should be consistent, but consider size and type on a functional basis. It is perfectly acceptable to mix 4-inch and 6-inch recessed lights in the same room.

In the example shown here, 6-inch lights are being used for general lighting, and 4-inch lights for accent lighting.

What’s the difference between 4-inch and 6-inch recessed lights?

Besides the physical size difference, 4-inch and 6-inch lights can be compared in terms of their style and function.

4 inch lights

Style – 4-inch lights lights are generally considered more modern than 6-inch lights because of their compact size.

Function – 4-inch lights often have more options for gimbal and specialty trims used for task and accent lighting applications.

6 inch lights 

Style – 6-inch lights can appear more proportionate for mid-size and large rooms where 4-inch lights can look under scale for the room.

Function – 6-inch lights usually have a higher lumen output than 4-inch  lights and a wide beam angle which makes them idea for general lighting.

What’s a better choice for your room?

To choose between 4-inch vs 6-inch lights for a room, first determine which lighting layers the room needs; General, Task, and/or Accent lighting. Then plan each layer separately

Since all rooms need general lighting, I like to start with that first. Then you can add additional task lighting (if necessary), and finally accent lighting if appropriate for the room. 

I’ve created a decision tree that will walk you through my recommendations based on your room. You can tap or click on each one to enlarge it.

How many and what size recessed lights do I need?

footage x 1.5 = total wattage needed. Total wattage divided by 60 watts (or whichever wattage you select) = total amount of recessed can lights. Example: 240 square foot room x 1.5 = 360 divided by 60 (the bulb wattage I'd like to use) = 6 recessed lights needed. ​Now we will calculate the spacing between each light.

How many 6

A common rule of thumb is one recessed light for every 4 to 6 feet of ceiling space.

How much area does a 6

Every manufacturer will provide a maximum spacing criterion for their lights. For example, for a 6-inch light, typically, the number is 1.5, which should be multiplied by the ceiling height. So, if your ceiling is 8 feet tall, multiplied by 1.5, the maximum space between each light should be 12 feet.

What size can light for 10 foot ceiling?

To find an ideal height for a foyer light, take the room's height, then multiply it by 2.5 and 3, which will give you 2 numbers. (For example, if your room has a 10-foot ceiling, you will get 25 and 30.) Those two numbers are a good range for foyer light heights.