What precautions should be taken when preparing a wet mount?

While preparing wet mount of a specimen using water or Vaseline, following precautions should be taken:1. use appropriate amount of water or Vaseline.2. no air bubble should be present under the cover slip.3. mount should not be thicker as thicker mounts do not produce clear image of the specimen.4. if specimen is thick, then support the cover slip using a thicker material from the sides.

5. gap between glass slide and cover slip should be shallow.

  • Trending
  • Popular
  • Contact us

Last Update: May 30, 2022

This is a question our experts keep getting from time to time. Now, we have got the complete detailed explanation and answer for everyone, who is interested!

Asked by: Myrtis Tillman
Score: 4.5/5 (64 votes)

  1. Place a drop of fluid in the center of the slide.
  2. Position sample on liquid, using tweezers.
  3. At an angle, place one side of the cover slip against the slide making contact with outer edge of the liquid drop.
  4. Lower the cover slowly, avoiding air bubbles.
  5. Remove excess water with the paper towel.

What is a wet mount and how is it prepared?

A wet mount is made by placing a fluid solution on a slide, suspending a specimen in a solution, and then covering the specimen and the solution with a cover slide. Why would use a wet mount? To increase the specimens translucency and to make it easier to stain.

How do you prepare a wet mount from a pool of water?

Place a small drop of water (without specimen) in the center of the microscope slide. Place the specimen into the water. Add some more water on top of the specimen and make sure that the specimen is completely submerged. Otherwise there is the possibility for air bubbles forming between cover glass and specimen.

What is wet mount preparation in microbiology?

The simplest type of preparation is the wet mount, in which the specimen is placed on the slide in a drop of liquid. Some specimens, such as a drop of urine, are already in a liquid form and can be deposited on the slide using a dropper. ... The “fixing” of a sample refers to the process of attaching cells to a slide.

When preparing a wet mount for study under the microscope?

Question: When preparing a wet mount for study under the microscope, you must ensure that a cover slip is placed over the specimen a drop of water is added to the specimen on the slide the low power lens is above the object on the stage a drop of methylene blue is added to the specimen.

26 related questions found

Wet Mount. In a wet mount, a drop of water is used to suspend the specimen between the slide and cover slip. ... This method will help prevent air bubbles from being trapped under the cover slip. Your objective is to have sufficient water to fill the space between cover slip and slide.

A wet-mount slide is when the sample is placed on the slide with a drop of water and covered with a coverslip, which holds it in place through surface tension. Advantages - This type of slide preparation allows you to view microscopic living things without them drying out.

You will use wet mount preparations to see the following: The size and shape of individual organisms. The characteristic arrangement or groupings of cells. Whether the organism is motile or nonmotile.

What precautions should be taken when preparing a wet mount?

  1. use appropriate amount of water or Vaseline.
  2. no air bubble should be present under the cover slip.
  3. mount should not be thicker as thicker mounts do not produce clear image of the specimen.

The hanging drop and wet mount techniques allow for observation of living organisms. The wet mount tend to dry out quickly under the heat of the microscope light; it is simpler to perform than the wet mount, but it is useful for short-term observation only.

What is the value of a wet-mount preparation in the clinical laboratory? The value of a wet-mount prep in the clinical lab is being able to see a living specimen and look for motility, which aids in identity of the organism.

Lactophenol cotton blue wet mount preparation is commonly used for microscopic identification of fungi. It is formulated with lactophenol, which serves as the mounting fluid and the dye, cotton blue. Lactic acid preserves the fungal structure and clears the tissue while phenol acts as a disinfectant.

Medical Definition of wet mount

: a glass slide holding a specimen suspended in a drop of liquid (as water) for microscopic examination also : a specimen mounted in this way.

Wet mount slides are most commonly used where you are observing live specimens that either live in water or their movement is most easily observed in a liquid medium. For example, you could technically observe bacteria under dry mount slide however this will greatly reduce the ability of the bacteria to move.

Wet-mount: A microscope slide specimen is suspended in a drop of liquid located between the slide and coverslip. Different Types of Wet-mounts: -Water from organism's natural habitat. Advantages: -Quick preparation. Disadvantages: -Movement of specimens make it difficult to draw/photograph.

Dry mount means placing sample directly on slide without putting water. Wet mount means placing a sample in drop of water on slide and then covering it with cover slip.

Standard slides can be either plastic or glass and are 1 x 3 inches (25 x 75 mm) in size and 1 to 1.2 mm thick. Wet slides will use a cover slip or cover glass, a very thin square piece of glass (or plastic) that is placed over the sample drop.

When viewing any slide with a microscope, a small square or circle of thin glass called a coverslip is placed over the specimen. It protects the microscope and prevents the slide from drying out when it's being examined. The coverslip is lowered gently onto the specimen using a mounted needle .

In order to accurately look at specimens under a microscope, you must first need to learn how to properly prepare a wet mount. A wet mount is made by placing a fluid solution on a slide, suspending a specimen in a solution, and then covering the specimen and the solution with a cover slide.

Advantages: Like the wet mount, the hanging drop method preserves cell shape and arrangement. The Vaseline-sealed depression also slows down the drying-out process, so the organisms can be observed for longer periods. Disadvantages: The hanging drop method is also far too risky to use with highly pathogenic organisms.

Yeast cells found on the wet mount mean a vaginal yeast infection is present. Trichomonads on the wet mount mean trichomoniasis is present. Clue cells means bacterial vaginosis is present. If many Gardnerella vaginalis bacteria are present, this also may mean bacterial vaginosis is present.

The saline wet mount is an unstained preparation made by using physiological saline. The advantage of saline preparation is that it helps to demonstrate the motility of trophozoites.

Saline wet mount is made by mixing a small quantity (about 2 mg) of feces in a drop of saline placed on a clean glass slide. ... The smear is then examined under a microscope.

In a saline wet mount test, a drop of vaginal discharge is placed on a slide with 1-2 drops of 0.9% isotonic sodium chloride solution and examined under high power (×400). This test is 60% sensitive and 98% specific for bacterial vaginosis.



Welcome to FAQ Blog! This is your one-stop encyclopedia that has numerous frequently asked questions answered. Our team has collected thousands of questions that people keep asking in forums, blogs and in Google questions. Our experts have done a research to get accurate and detailed answers for you. So, feel free to use this information and benefit from expert answers to the questions you are interested in!

What precautions should be taken when preparing a wet mount?

What precautions should be taken when preparing a wet mount?
What precautions should be taken when preparing a wet mount?

Get the answer to your homework problem.

Try Numerade free for 30 days

What precautions should be taken when preparing a wet mount?

California State Polytechnic University, Pomona

David C.

Biology

2 months, 1 week ago