<<Prev
MCQ on Projections of Lines1) When a line is parallel to HP and VP, its top view is in the form of______a) Point b) True lengthc) Reduced length d) None of these 2) When a line is parallel to HP and VP, its true length will be in______a) TV only b) FV onlyc) Both TV and FV d) Side view 3) When a line is parallel to HP and inclined to VP, its true length will be in____a) TV only b) FV onlyc) Both TV and FV d) Side view 4) When a line is parallel to HP and inclined to VP, its reduced length will be in_____a) TV only b) FV onlyc) SV only d) both FV and SV 5) When a line is parallel to VP and inclined to HP, its true length will be in_____a) TV only b) FV onlyc) SV only d) both FV and SV 6) When a line is parallel to VP and inclined to HP, its reduced length will be in_____a) TV only b) FV onlyc) SV only d) both TV and SV 7) When a line is perpendicular to HP, it is parallel to______a) VP only b) PP onlyc) HP only d) both VP and PP 8) IF the given line is perpendicular to VP, its true length will appear in_______a) VP only b) PP onlyc) HP only d) both HP and PP 9) IF the given line is perpendicular to VP, the point will appear in_______a) VP only b) PP onlyc) HP only d) both HP and PP 10) For given line AB, end point A is 20 mm above HP and end point B is 20 mm above HP, then this line is _______________a) Parallel to VP b) Parallel to HPc) Perpendicular to HP d) Perpendicular to VP 11) For given line AB, end point A is 20 mm in front of VP and end point B is 30 mm in front of VP , then this line is_______________a) Parallel to VP b) Inclined to VPc) Perpendicular to HP d) Perpendicular to VP 12) For the given line AB of length 60 mm, endpoint A is 20 mm in front of VP and endpoint B is 30 mm in front of VP, then front view __________a) Less than 60 mm b) Greater than 60 mmc) Equal to 60 mm d) Can not say 13) For the given line AB of length 60 mm, endpoint A is 20 mm above HP and endpoint B is 20 mm above HP, then top view of this line is __________a) Less than 60 mm b) Greater than 60 mmc) Equal to 60 mm d) Can not say 14) For the given line AB of length 60 mm perpendicular to VP, endpoint A is 20 mm above HP and endpoint B is 20 mm above HP, then the front view of this line is __________a) point b) Greater than 60 mmc) Equal to 60 mm d) Can not say 15) Is it possible for any line that its top view and front view are in the form of point?a) Yes b) No 16) If a given line is perpendicular to HP its top view is_____a) Larger than its actual length b) Smaller than its actual lengthc) Equal to its actual length d) point 17) If a given line is perpendicular to VP its top view is_____a) Larger than its actual length b) Smaller than its actual lengthc) Equal to its actual length d) point c) Equal to its actual length 18) If a given line is parallel to the profile plane and inclined to both horizontal and vertical plane its projection of true length will be in____a) HP b) VPc) PP d) None of the above 19) If a given line is perpendicular to the profile plane its projection in the form of point will be in_____a) HP b) VPc) PP d) None of the above 20) If the projection of line appears as a point in HP, the line is parallel to_____a) PP b) VPc) both PP and VP d) None of the above <<Prev
16-The side view of an object is drawn in
(Ans: c) 17-When the line is parallel to both Horizontal Plane (HP) and Vertical Plane (VP), we can get its true length in
(Ans: c) 18-When the line is parallel to VP and perpendicular to HP, we can get its true length in
(Ans: c) 19-The following method(s) is used to find the true length and true inclination of a line when its front view and top view are given
(Ans: d) 20-The front view of a rectangle, when its plane is parallel to HP and perpendicular to VP, is
(Ans: c) 21-Which of the following position is not possible for a plane?
(Ans: b) 22-The following are the Polyhedron except
(Ans: d) 23-The following are the Solids of revolution except
(Ans: a) 24-If a solid is cut by a cutting plane parallel to the base of the solid and top part is removed, the remaining part is called
(Ans: a) 25-A right regular hexagonal prism in resting on HP on its base, its top view is a
(Ans: c) 26- Which of the following position is not possible for a right solid?
(Ans: d) 27-The top view of a right cylinder resting on HP on its base rim is
(Ans: b) 28-A tetrahedron has four equal ____ faces
(Ans: c) 29-The following is formed by revolving rectangle about one of its sides which remains fixed
(Ans: a) 30-The sectional plane are represented by
(Ans: d) |