Why will my UE Megaboom not charge?

There are several reasons for UE Megaboom not charging. It could be a software issue or a hardware problem that needs fixing or replacing.

Software issues are easier to solve while hardware issues could signify a bad micro-USB cable, or a damaged charging port. Software issues can be fixed by simply updating the firmware, however, hardware issues will cost you. Keep in mind that you might have to repair or replace a few parts to get the speaker working again.

In this article, we will dive down into the likely reasons your UE Megaboom speaker is not working, and the right fixes to apply.

Quick Fix

Before you start checking the USB cable, charging port, and outlet, you might want to try out this quick fix to see if it solves the problem.

• Connect the speaker to the charger and leave it connected for a few seconds.
• Watch if the LED fails to pulse continuously. If this happens, disconnect the cable from your speaker, then reconnect it and leave it connected for a few seconds.
• Repeat both steps 1 and 2 until the speaker is able to get to a normal charge cycle – the LED should pulse continuously. (This process could take up to 30 minutes). From there, you can charge the battery until it reaches 100%.

Update the Firmware

While hardware issues are the most common cases, software problem is also common. Your speaker could have trouble charging because of software bugs or glitches. To clear any software bugs, you will have to update the firmware on the speaker. To update the Megaboom software, you will have to download the latest app for the speaker. Connect the speaker to your smartphone and open the app. Tap the update prompt to update the firmware and clear any software issues.

Get a New Charging Cable

If you notice that the charging cable does not make a tight fit as it once did, it could be that the connector pins have expanded and the cable is unable to make a better connection with the charging pot. If you update the software, then you can decide that this is the problem.

Test the cable to see if it fits properly. Before going ahead to buy a new micro USB cable, check if the outlet is working properly. You can do this by testing another device. Check if the power adapter is also in good working condition.

If everything seems okay, then you can switch the USB cable. You can tell if the USB cable is damaged by checking the connector plating for any signs of wearing. If you notice any chipping, then getting a spare cable should solve the problem. If you don’t have a spare cable, then you will have to purchase a new one.

Replace the Charging Port

If changing the USB cable doesn’t solve the problem and the battery still fails to charge, then you might want to take a look at the charging port. If you’ve been in the swimming pool or the ocean with the speaker and you failed to rinse it after, it could be that the port is damaged due to contact with water.

While the entire speaker is waterproof, the chemicals in the pool and salt in the ocean could break down the waterproof seals. If you’re to take the speaker into the water, rinse it immediately to get rid of the chemicals and salts. If you haven’t done this before, and you notice a charging problem, it could be that the charging port is damaged.

Other causes of charging port damage could be bent connector pins or dirt. Inspect the charging port and clean any dirt you can find. If this doesn’t work, then you will have to take the speaker to a repair shop. If the charging port is damaged, you won’t be able to repair it but will have to replace the port. This will cost you a few bucks but will get everything working again.

Replace the Battery

The UE Megaboom speaker runs on a lithium-ion battery. While they have a long lifespan, they will eventually be unable to hold a charge. This happens if you’ve been using the speaker for a while. The lithium-ion battery also has a charging temperature range. This means if it is too hot or too cold, the battery will be unable to charge. In most cases, it is likely that the battery is already damaged and won’t be able to hold a charge regardless of the fix applied.

You could find a replacement battery from your local supplier. Replacing the batteries will require some care but it shouldn’t be a problem. You could check YouTube tutorials to help you out. If you’re unable to do it by yourself, then taking the speaker shop will save you time and prevent any further problems.

How to Recharge the UE Megaboom Speaker

To recharge the UE Megaboom speakers, plug the charging cable into the micro-USB port inside the speaker. While the Megaboom has been tested to withstand up to 1 meter of submersion of u to 30 minutes, you will want to avoid taking it into the water. Avoid charging the speaker if the micro-USB port, charging cable, or connectors are wet.

If you still want to take your speaker into the swimming pool or ocean, you should thoroughly rinse it with fresh water and allow it to dry before charging it. Keep in mind that while the speaker is waterproof chemicals and salt from water bodies can damage the waterproof seals with time.

Using the USB cable, it should take up to 5 hours and 30 minutes to recharge the UE Megaboom Speaker up to 100%. However, it will be able to be charged faster if you have a USB charger with a higher output.

Final Thoughts

While the UE Megaboom speaker is waterproof, you should save yourself the trouble and avoid taking the water bodies while listening to music. You should start by checking the outlet then updating the firmware, check the USB cable before considering the charging port and battery problems.

Ue megaboom not charging. UE mega boom is the speaker, and these speakers are very good, and their quality is fantastic. We always use speakers that are good in quality and can use them for a long time. These speakers are helpful for us.

Speakers are necessary for audio, and this device works during the charging process; when you charge it, it starts working. The issue with the UE mega boom speaker is that it is not charging; there must be an issue that enforces the speakers won’t charge.

There are some issues with UE mega boom that are not charging, and many issues are behind this problem, below are the reasons, and causes, or you I also said the issues, that are discussed briefly, and here these issues are given.

1. Defective charging cable

The issue is with the charging cable; this cable is defective and does not allow the device to charge. This is a big problem when the cable gets worse or gets defective, and we have to change it or make it accurate.

If an issue is small, you can quickly solve it by twisting tape on it or cutting and rejoining the wires, but if the issue is ample means the wire maybe get burned and creates a solid issue that you have not solved on your own.

You mostly do not solve these issues, which can be solved by replacing the wire.

When you replace the wire, you can get rid of the problem; this is the easy and normal thing that when your cable is not working well, replace it and make it work again.

2. Battery issue

Another issue is with the battery. When your battery gets worse, it this not get charged, and sometimes it is even not plugged in charging. As these are battery-based devices, they do not work without a battery and a defective battery; this battery always needs a solution to the problem.

First, you open the device and check its battery that which is the problem; you can quickly get information that the battery is facing which issue. When you know the issue, you have to solve it.

If the issue is at a stage that is not easy to solve, then it needs replacement. Batteries have a fixed time warranty after that period, and batteries get bad every time.

These batteries are generally available in the market, and you can buy them, but in case they are not so, you can buy them from the online store by order.

3. Bad charging port

The charging port gets bad, and this port can get damaged due to many reasons; there may be moisture that does not allow it to work good. When the moisture attacks it, this gets worse, and not only worse, but this port can also damage you when you use this port for charging.

You should take care of the things you have in your home and check from time to time; these are some problems that, if not solved at the time, create big issues that are not easily solved.

When UE mega boom is not charging, like the other things, you can also check its charging pot that if it contains any issue, solve it.

4. Power issue

The issue is maybe with the power; when you attach the mega boom to the charging, you must check the electricity power. Sometimes your power is creating an issue, and you are not aware, so you must check that the electricity is coming from the main unit to the outlet and from the outlet to the charging of the device.

The power, you may say that it is the necessary need for charging the devices. Power issues do not allow things to get charged; make sure that electricity is providing sound to the device for charging, then it starts charging.

5. Socket

Another issue is with the socket; the socket that you are using is creating an issue. The issue may not be with the whole board, just that socket. There are many ways to check whether the socket is working or not.

You can check it by placing the switch on the other socket or the outlet. You can do many things to check it, and when you get confirmed about that issue, you can also make the socket correct.

Or the easy thing is that you have to place the switch to the other for that time, and after the solution of the issue, you can also solve the issue you are facing about the problem.

Summary

Above all things are the causes behind the problem and if you watch your UE mega boom to charge, you should read all these problems and solve them right by solving them. These are some main and common problems you must solve if you want the best working and good charging of your UE mega boom.

I hope this article is very helpful for you and you can get exciting information about the problem you are facing. Thank you! for reading it attentionally.

Related Guides