What is the most active transition metal

In this explainer, we will learn how to describe the compounds and reactivities of transition metals and trends in their physical and chemical properties.

Most elements on the periodic table are metals. There are only a handful of elements that are metalloids and nonmetals.

The elements are placed in specific groupings or families on the periodic table because they react in a similar manner. For example, the metals in group 1 have similar chemical properties and they are grouped together and called the alkali metals. The metals in group 2 behave in a similar manner to each other and are collectively called the alkaline earth metals. The metals in groups 3 to 12 are collectively called the d-block elements, outlined in red in the periodic table below.

Older naming conventions for the vertical columns of the periodic table’s d-block use IIIB, IVB, VB, VIB, VIIB, VIIIB, IB, and IIB as can be seen in the section of the periodic table shown below. VIIIB covers three groups (8, 9, and 10).

The d-block elements are sometimes loosely referred to as the transition metals. However, not all d-block elements are transition metals according to the International Union of Pure and Applied Chemistry (IUPAC). The IUPAC definition of a transition metal is an element whose atoms have an incomplete d subshell or that can give rise to cations with an incomplete d subshell.

Definition: Transition Metal

A transition metal is an element whose atoms have an incomplete d subshell or that can give rise to cations with an incomplete d subshell.

The elements in group 12, zinc (Zn), cadmium (Cd), mercury (Hg), and copernicium (Cn), have complete d subshells and so are not generally considered transition metals.

The periodic table above shows, in orange, which elements are considered to be transition elements according to the IUPAC definition. The elements in the lanthanide and actinide series, the f-block elements, are also transition elements and are known as the inner transition metals.

Example 1: Identifying Which Element Is Not a Transition Element

Which of the following is not a transition metal?

1. Cobalt
2. Rhodium
3. Zirconium
4. Potassium
5. Gold

Answer

A transition metal is any element which has an incomplete d subshell or which can form cations with an incomplete d subshell. These elements are shown in orange below.

Of the possible answer options, only potassium does not have d electrons or an incomplete d subshell. Potassium is located in the s block and so its valence electrons are in an s subshell. The correct answer is D: potassium.

The elements found in period 4 of the d block are known as the first transition series. The elements found in period 5 are known as the second transition series, and those in the 6th period are known as the third transition series.

Let us investigate some of the physical properties of the transition metals.

Like all metals, the transition metals are malleable and can be hammered into flat sheets. They are also ductile and can be pulled into thin wires. The transition metals contain the most malleable and ductile elements, namely, gold, silver, and platinum.

Another physical property of the transition metals that is noticeably different from other metals is the melting point. The graph below shows the melting points of some s-block metals and the transition metals in period 4, as well as the melting point of tungsten.

The graph shows that the melting points of the transition metals are, in general, higher than the melting points of the s-block metals. Tungsten, in period 6, is also a transition metal. It has the highest melting point of all pure metals, 3422∘C.

Example 2: Understanding Melting Point Trends for Transition Metals versus Main-Group Elements

Shown in the graph are the melting points of the first 56 elements of the periodic table and the groups in which they occur.

The transition metals are positioned between groups 3 and 11. Which of the following is the most accurate comparison of the melting points shown in the graph?

1. The transition metals and main-group elements display a similar range of melting points.
2. The transition metals have lower melting points than almost all of the main-group elements.
3. The transition metals have lower melting points than all of the main-group elements.
4. The transition metals have higher melting points than almost all of the main-group elements.
5. The transition metals have higher melting points than all of the main-group elements.

Answer

The graph shows that elements in groups 3 to 11 generally have higher melting points than the elements in other groups. There are only a few red dots (melting points) positioned higher than those in groups 3 to 11. This tells us that some main-group elements have higher melting points than transition metals, but this is not the general trend. The statement that is the most accurate is statement D: the transition metals have higher melting points than almost all of the main-group elements.

Metals, in general, conduct heat and electricity well. The transition elements in group 11, specifically copper, silver, and gold, are particularly excellent conductors of electricity. Copper is the cheapest and most abundant of these metals and therefore is commonly used in electrical wiring. Some specialist devices use gold to conduct electricity instead of copper and, of the three metals, silver has the highest conductivity.

Hardness and strength are important physical properties in the manufacturing of metal components. Many transition metals are relatively hard compared with s-block metals, some of which are soft enough to cut with a knife. Most transition metals are also strong. For example, titanium has high strength. Transition metals are very useful in applications where strength or hardness is required.

High density is another property common to many transition metals. The graph below shows the relative densities, at room temperature, of some transition metals compared with several s-block metals.

The density of transition metals is generally much higher than the density of metals in the s-block. The two most dense metals of all metals are osmium and iridium, both transition metals, with densities of nearly 23 g/cm3.

The transition metals also show some obvious differences to other metals in terms of chemical properties. A noticeable difference is that most transition metals are able to form more than one stable oxidation state, while most main-group elements tend to have only one stable oxidation state, besides an oxidation state of zero which all elements exhibit in their pure form. For example, manganese has a variety of possible oxidation states that allows manganese to form a variety of compounds.

Manganese Oxidation StateExample of an Associated Compound or Ion+2Mn2+, manganese(II)+3Mn3+, manganese(III)+4MnO2, manganese(IV) oxide+5MnO43–, manganese(V)+6MnO42–, manganese(VI)+7MnO4–, permanganate

Transition metal ions can be converted between their different oxidation states by oxidizing or reducing them. The equation below shows how iron in the +2 state can be oxidized to a +3 state, and reduction will convert the Fe3+ ion back to the Fe2+ ion. FeFe+e2+3+–OxidationReduction

Typically, when a transition metal has a low oxidation state, it exists as an individual ion, for example, the ferrous or iron(II) ion exists as Fe2+, and the ferric or iron(III) ion exists as Fe3+. When a transition metal has a high oxidation state, it is usually bonded to another element such as oxygen in an oxide or polyatomic anion. Two instances of this occur with the element chromium, which can bond to oxygen when it has an oxidation state of +6, forming the chromate and the dichromate ions. This is shown in the following table.

Ion NameIon FormulaOxidation StateCommentIron(II) ionFe2+Low+2Individual metal cationIron(III) ionFe3++3Chromate ionCrO42–High+6Metal ion is bonded to another element.Dichromate ionCrO272–+6

Example 3: Understanding That Transition Elements Have Several Stable Oxidation States

Which of the following statements explains why platinum, palladium, and rhodium are used in converters in car exhausts?

What is the most active metal?

What is the most active metal family?

What are the most active metals located?

What is the highest transition metal?