How does the all-new 21st century Sig Sauer P238 fit into this historic scenario? The innovative little .380 has much of its design firmly rooted in John Browning’s original Colt Model 1911 and Browning-designed short-recoil action. In fact, with the exception of its solid camming barrel lug and lock, the foundation of which dates back to the first Sig models built in the 1940s, the P238 is essentially a scaled down variation of the Model 1911. More accurately, it’s a modernization of the Colt .380 Government Model, Government Pocketlite L.W. and the 380 Mustang semi-autos built circa 1983-1999. Like the old .380 Colts, the Sig Sauer P238 does not utilize a grip safety or barrel bushing. The Sig Sauer is, for want of a comparison, a better built and more modern incarnation. Show Gun Details If you are familiar with the basic operation and take down steps for a Model 1911A1 or Colt’s .380 Mustang semi-autos, the P238 really is “old school.” What is new about the P238 is its size and Sig Sauer’s decision to use all-metal construction—a stainless steel slide with an anodized alloy beavertail style frame, rather than a polymer frame. Even the grips are of handsomely fluted alloy construction secured with two large anodized screws. The Sig’s skeletonized hammer adds a customized look to the gun’s sturdy, chiseled appearance, as does the standard Nitron black corrosion-resistant finish. A two-tone version is also available with a matte stainless steel slide, thumb safety, slide stop, and magazine release, contrasting the Nitron black frame, grips, and backstrap. The P238 can also be ordered with rosewood grips, in two-tone with blackwood grips, and any version can be fitted with Siglite night sights. The test gun was the two-tone version with standard dovetailed front post and rear notch white dot contrast sights. Depending upon hand size, the grips are deep enough to allow a solid hold with the thumb, second and third fingers. The little finger falls squarely underneath the magazine for a firm two-handed hold. Range Time The range test was conducted at a distance of 10 meters (33 feet) using two popular brands of .380 ACP ammunition: Sellier & Bellot 92-grain FMJ, and Magtech 95-grain FMC rounds. I also had a small supply of Federal Premium Hydra-Shok 90-grain JHP but not enough to conduct a full test. This is the same ammo I generally carry in my own Ruger LCP and would be the first choice for defensive use. The tests were fired using a two-hand hold Weaver Stance. The Magtech .380 rounds cleared the ProChrono traps at an average of 876 fps (feet per second), the Sellier & Bellot just a bit slower at 850 fps. Both rounds induced the same degree of recoil from the compact Sig Sauer, which was more than manageable with a firm hold. Limp-wristed shooters need not apply. The old Colt .380 was well named, Mustang. That much of the design is still relevant with the Sig Sauer P238. Keep Reading Didn't find what you were looking for?Search Which SIG Sauer is the smallest?With an overall length of just 5.5 inches a height of 3.96 inches, and weighing just under a pound, the P238 Nitron is the ultimate firepower in an all metal frame concealed pistol.
Does SIG Sauer make a .380 pistol?The SIG SAUER P365-380 is a striker-fired pistol chambered in 380 with a 10+1 capacity. This micro-compact pistol features a modular polymer grip module, optic-ready stainless-steel slide with Nitron finish, a curved striker trigger, and dovetail SIGLITE night sights.
What is the smallest gun that SIG Sauer makes?SIG SAUER Nitron Micro-compact Handgun.
What is the difference between Sig P238 and P938?If you're looking at a tiny Sig, you'll naturally start weighing the P238 vs P938. They're the same gun for all intents and purposes, but the P938 is a little bigger and chambers 9mm rather than . 380 Auto.
|