Which is required for karst topography to form Brainly?

By default, the land surface is hard and can support very heavy loads, including those of trucks, buildings and much more. However, at times, some surfaces are not stable, either due to natural or human causes and can actually sink several meters into the ground and with them, anything that was on the surface, like houses, cars and roads. These are sinkholes and this article will describe them in detail.

As the name suggests, sinkholes involve land sinking, causing holes on the ground. They are cavities or pits in the ground that form when water erodes an underlying rock layer, or if the rock is limestone, salt beds, or carbonate rock, which can naturally dissolve by groundwater circulating through them.

As the rock dissolves, spaces and caverns develop underground causing the surface to be susceptible to sinkholes. Sinkholes are very dramatic as land can stay intact for quite some time until the underground spaces get very big. If there is not enough support for the land above the spaces, a sudden collapse of the land surface will occur, resulting in sinkholes.

Depending on the location, the damage was done underground and many other factors, a sinkhole can be about one meter in depth and width and can go as deep and as wide as hundreds of feet and beyond. One of the largest sinkholes known is one in the limestone mountains of Nongle in Guangxi Zhuang region in southern China. The sinkhole measures 656 ft long, 328 ft broad and 387 ft deep and when measured from the access point on the mountain ridge, the sinkhole is even deeper, at 1,476 ft. The world’s deepest sinkhole is in Chongqing, China, reaching down 662 meters.

There are two types of sinkholes. The first one forms when the roof of a cave collapses and exposes the underground cavern. The second one forms when water dissolves the rock beneath the soil and creates an underground chasm. Without rock to support it, the layer of soil eventually collapses and creates a hole on the surface.

Additionally, sinkholes can result from both natural and human causes. Man-made sinkholes are created when a city development compromises the structural integrity of underlying rock. Roads, buildings and other infrastructure can cause water to collect in certain areas and wash away any supporting layer of rock, resulting in sinkholes.

Contents

• Various Causes of Sinkholes
  • 1. Water
  • 2. Human Activities
  • 3. Induced Earthquakes
• Types of Sinkholes
  • 1. Solution Sinkhole
  • 2. Cover Collapse Sinkhole
  • 3. Cover Subsidence Sinkhole
• How Are Sinkholes Formed?
• Effects of Sinkholes
• Where Do Sinkholes Occur?
• Can a Water Leak Cause a Sinkhole?

Various Causes of Sinkholes

1. Water

Water is responsible for about 90% of all sinkholes and this is how:

a. Weathering: If the rocks below the surface are made of materials that dissolve in water like limestone and gypsum, the water dissolves these minerals and opens spaces within the rock. This process is known as weathering and results in sinkholes. Over hundreds or thousands of years, underground water trapped beneath the surface causes natural underground currents that dissolve these rocks and forge chasms under the ground.

The top of the chasm gradually grows towards the surface and, eventually, the surface layer gets thinner and thinner until it becomes too weak to support what is above it and falls in. Mexico’s Yucatan Peninsula and the areas around the Dead Sea are often riddled with sinkholes as the rock layer in the area is easily dissolved

b. If the rock does not dissolve in water: This occurs when the rock under the surface doesn’t dissolve in water but instead is made of grains that are small enough to be carried away by underground water currents, resulting in sinkholes. In 2010 in Guatemala City, for instance, a three-story building vanished into a sinkhole, killing 15 people, as the underlying rock was predominantly weak crumbly volcanic rock, fine ash and other debris that had erupted from a volcano.

c. Surface-water: This third situation has nothing to do with underground water currents, but rather is all about water movements above-ground. They are triggered by intense rainstorms or floods and burst or long-term leakage from a sewer or storm-water pipes. If these currents are too strong, the water will not go where it is used to but rather, will find new paths.

See also  What is an Earthquake: Types, Causes and Effects

If it travels on a surface without ample support from below ground, it will result in sinkholes. Additionally, the water may settle in one location, causing the surface to become impermeable with water but as it leaks into the ground, it will result in sinkholes.

d. Weather changes: Sinkholes can also result from seasonal changes in the groundwater table, freeze and thaw of the ground and extreme precipitation, showcased when there are heavy rains following droughts.

e. Changes in the hydrologic system: Sudden changes to the hydrologic system, such as putting more water in or taking it out, can cause systems to become temporarily unstable, resulting in sinkholes

f. Changing groundwater gradients: If there is a change in the groundwater gradients, mainly due to the removal or introduction of water to these systems, loose materials can flush out quicker than usual, causing voids, which result in the collapse of the surface

2. Human Activities

Some human activities are resulting in more sinkholes today. For instance, Louisiana is reporting sinkholes forming from abandoned mines. In Florida, many sinkholes are as a result of many underground voids and drainage systems carved from the carbonate rocks throughout the state. If these overlaying layers of ground collapse into these voids, a sinkhole is born. Also, drainage systems may break and drain water into these rocks that are weak against such waters. The result will be a sinkhole.

3. Induced Earthquakes

Earthquakes are a natural occurrence, which might result in sinkholes, assuming they hit areas with a weak rock below the surface. However, there are increased induced earthquakes, which are as a result of both industrial and human activities, which also causes sinkholes. Careless mining and hydraulic fracking can impact an area especially its stability as well as water quality, resulting in earthquakes that result in a sinkhole.

In August 2012, a massive sinkhole opened near Bayou Corne, 77 miles west of New Orleans and grew to 34 acres in size over four years. The sinkhole was attributed to seismic activity and baffling bubbling on the Louisiana Bayou, which was caused by the Texas Brine Company which drilled too close to the salt dome’s outer edge

Sinkholes can be natural or man-made. Natural sinkholes occur due to erosion or underground water. They start developing a long time before it actually appears. The ground beneath our feet is not as much of a solid structure as we think it is. The ground is made from dirt, along with many rocks and minerals. There is water continually seeping in between the mud, rocks and minerals, as it makes its way down to the groundwater reservoirs.

As this happens, the water slowly erodes the rocks and minerals. Sometimes the flow of water increases to a point when it washes away the underground structure of the land. And when the structure becomes too weak to support the surface of the earth, it collapses and opens up a sinkhole. This is how sinkholes are formed.

Humans are also responsible for the formation of sinkholes. Activities like drilling, mining, construction, broken water or drain pipes, improperly compacted soil after excavation work or even heavy traffic can result in small to large sinkholes. Water from a broken pipe can penetrate through mud and rocks and erode the ground underneath and cause sinkholes. Sometimes, heavyweight on soft soil can result in the collapse of the ground, resulting in a sinkhole. Sinkholes can also form when the land surface is changed.

Areas that have a bedrock made of limestone, salt deposits or carbonate rock are most susceptible to erosion and the formation of such holes. These rocks tend to erode as acidic water passes through them. When rainwater passes through decaying plant debris, it tends to become more acidic.

Over a period of years, overlying sediments collapse and a sinkhole gets developed. Sometimes the holes are small, measuring a few feet wide and ten to fifteen feet deep. Others can be hundreds of miles wide and deep. However, all of them can be dangerous for those that get caught in them. There are three major kinds of sinkholes. Their formation is determined by the same geological processes, barring a few differences.

See also  Causes, Effects and Solutions to Drought

Types of Sinkholes

The three major types of sinkholes know to us are Solution, Cover Collapse and Cover Subsidence.

1. Solution Sinkhole

Solution sinkholes are most commonly seen in areas that have a very thin cover of soil on the surface, exposing the bedrock below to continual erosion by water. As the water percolates through the bedrock, it carries away small parts of the rock with it. As the bedrock erodes, particles collect in the spaces it leaves.

Over a period of time, a small depression is formed. It is at this point where the hole forms. The hole is usually bowl-shaped and can be quite large. Sometimes the bedrock may collapse all of a sudden to form such a solution sinkhole and other times it happens over time.

2. Cover Collapse Sinkhole

The second kind of sinkhole is known as a Cover Collapse sinkhole. These take place when the bedrock is covered by a deep layer of soil and earth. Once the bedrock begins to get eroded, the crack starts forming in the rocky areas around it. When this happens, a number of weak points begin to form in the layers of soil and strata above it. Finally, it comes to a point when the weak points become a large hole within the bedrock that cannot support the weight above it. The cover collapse usually happens in a sudden manner and can create large holes in a matter of minutes.

3. Cover Subsidence Sinkhole

The last kind of sinkhole is known as Cover Subsidence Sinkhole. In this case, the hole is formed over a period of time. The bedrock here is covered by soil and materials which are not well knitted together. Areas that have soil comprising largely of clay or sand often face the occurrence of this hole. Once the bedrock starts to erode, the clay or sand starts permeating through the cracks and settles into the spaces left behind. Over time, this creates a cavity on the surface of the soil and not under it.

How Are Sinkholes Formed?

1. The effect of water: As already mentioned, groundwater is the overwhelming reason for the formation of sinkholes. They often occur in ‘karst terrain’ which are areas where soluble bedrock such as limestone or gypsum can be dissolved in water. The bedrock becomes exposed to the water and is gradually worn down over time, some holes become ponds as they are filled with water and at any second, sinkholes could appear and swallow huge chunks of land with anything on them including roads, houses and even human beings and animals.

2. Naturally-occurring cracks: These cracks and small voids underneath the surface are hollowed out by water erosion, with only a cover of soil or sediment remaining on the top. If the hole continues to expand, the cover can no longer support its own weight and will collapse, revealing the cavern underneath

3. Heavy rains after a drought: After a prolonged drought, the surface is exposed enough and loses its strength. If heavy rains follow, they will cause immense pressure on the ground, that it sinks, creating sinkholes

4. Human activities: Human activity can also result in sinkholes. These activities include drilling new water wells, over-withdrawing groundwater, artificially creating ponds of surface water and even diverting surface water from one large area and concentrating it in a single point. Other activities like mining, construction, drilling, improperly compacting the soil after excavations, broken water or drainage pipes, and even heavy traffic could result in sinkholes.

Effects of Sinkholes

The effects of a sinkhole vary depending on where and how it was formed. Natural sinkholes can form on land and in the ocean as well. When they are formed on land, they can change the general topography of the area and divert streams of underground water. If they form suddenly in areas with a heavy population, they can cause a lot of damage to human life and property. Some holes are formed due to the leak in underground storm drains and sewer systems. When they collapse, the damage can be seen for many miles due to the repairs that become necessary.

See also  50+ Incredible Facts About Tsunamis

They can be dangerous to the foundations of the building. Toxic chemicals beneath the earth can come up and may pollute the groundwater. Sinkholes occur commonly in Florida as the state has many underground voids and drainage systems carved from the carbonate rocks.

Natural sinkholes cannot be prevented, as they are bound to occur. However, the ones caused due to human negligence can be prevented in time. Practices such as maintaining the underground systems and plumbing are the best to make sure that a sudden deep hole does not appear in the middle of a city!

Where Do Sinkholes Occur?

Sinkholes can occur anywhere in the world if the conditions favor it. However, they are concentrated in certain areas and here are some of these areas with some notable sinkholes:

1. Crveno Jerezo, Croatia: There is a 530m sinkhole with nearly vertical walls

2. Great Blue Hole in Belize: It is a perfectly round hole in the middle of an atoll that is 124m deep

3. Sima Humboldt, Bolivia: There is a 314m deep crater, formed from extremely resistant sandstone

4. Xiaozhai tiankeng, China: This is by far the deepest sinkhole known to date. Tiankeng is the local term for ‘heavenly pit’, or sinkhole. The Xiaozhai sinkhole measures 662m deep and 626m wide

5. Bowling Green, Kentucky: In 2014, a 40ft wide and 20ft deep sinkhole opened under the floor of the Skydome area of the National Corvette Museum, causing eight rare and one-of-a-kind Corvettes to sink. The vehicles were estimated to be worth over a million dollars. Other US states that are prone to sinkholes include Florida, Pennsylvania, Tennessee, Texas, California, Missouri, and Alabama.

6. Guatemala City, Guatemala: The sinkhole swallowed a three-story factory, killed 15 people and measured approximately 60ft wide and 300ft deep. It was triggered by tropical storm Agatha but it was because the city was built in a region where the first few hundred meters of the ground is made up of pumice fill, a material deposited during past volcanic eruptions

Can a Water Leak Cause a Sinkhole?

The answer to this is a definite yes!

Sinkholes occur when water erodes underneath the surface of the earth. The ground beneath your home, for instance, is not all solid. It contains pockets of air and water, which is commonly referred to as the water table. The stability of the ground is ensured, even if there are these gaps feet below the surface. If large amounts of water pour in and move the dirt, that stability is not entirely assured.

If there is a water leak, the excess water can help in eroding the ground. If it moves enough dirt, the ground could collapse into the gap, resulting in a sinkhole. A whole section of the ground could suddenly drop down even if the erosion has been happening over quite some time. This makes leak detection very crucial in preventing sinkholes, especially those that affect homes.

In most circumstances, it takes a very serious leak to create a sinkhole, unless the water condition beneath your home is very unusual. Nonetheless, there are warning signs of an impending sinkhole on your property before it falls through. To understand if there is a leak in your home which could one day result in a sinkhole, look out for the following sings:

Which of the following is required for karst topography to form quizlet?

What is karst topography solution?

Why does karst topography happen brainly?

Which is required for karst topography to form?