But ad revenue is our only way to manage this site. Without ad revenue we won't be able to continue to provide quality content and free firmware downloads. Show Please disable your ad blocker or whitelist Updato.com in order to continue into Updato's ad-light experience. Guide To Flash Update Samsung Galaxy S7 Edge Oreo 8.0.0 Odin Method Tested Firmwares, Free Regional Firmwares Ready To Be Downloaded. G935F G935FD G935V G935VC G935P G935T G935W8 G9350 G935S G935L G935K G935R4 G935U Important Things To Do Before Flashing Stock ROM: Before you can proceed to the process make sure that you do the things we will list below and that you read it carefully, this procedure works perfectly and tested by many users, so if you have doubt or questions about this post you can leave a comment below:
Why Need Stock Firmware?
Before starting the flashing process of this new update you need to read the following guidelines:
FIRMWARES DOWNLOAD LINK : SM-G935F Oreo 8.0.0 From Here SM-G935FD Oreo 8.0.0 From Here Install Smart Switch for install latest samsung drivers from here.
🔻🔻🔻🔻 ⧭⧭⧭⧭⧭⧭⧭ How to install Android 8.0.0 Oreo Update for Galaxy S7 Edge:
after unzip firmware file do not extract the tar.md5 archive. Switch off the device. Boot your phone in Download Mode:
– if you’ve changed your mind and you don’t want to boot Download Mode press Volume Down and your device will reboot in normal mode. After you’re done using Download Mode and updating your phone you will see the device restarting. If you’ve changed your mind and you don’t want to use Download Mode anymore, then you can press the Power button for ten seconds or Press all keys in same time (volume up+down+home button+power button) in order to exit Download Mode. Every time your device gets stuck while you’re using it, you simply need to press the montioned combination keys and the Galaxy phone will reboot in normal mode.
Step2: On your Odin, select files:
You need to know: simply wait until that’s done and the firmware file is loaded. Don’t worry if Odin gets unresponsive for a while, it’s normal. Binary size will also show up in Odin. Step 3: Make sure Re-partition check box is NOT selected, under the Options tab. Don’t use PIT tab either. Go back to Log tab btw, it will show the progress when you hit start button in next step. Or simply don't change anysitting. Step 4: Click the Start button on Odin now to start flashing the firmware on your Galaxy. Wait till installation is finished, after which your device will reboot automatically. You’ll get PASS message as shown below upon successful installation from Odin. INFO: If the FAIL alert is shown by ODIN app, then you will be forced to repeat the whole tutorial more than once. Make sure that if you repeat installation, then you won’t be skipping any steps and you will make sure that your phone meets all requirements above. If PASS is shown by ODIN, but the phone enters in a boot loop during restart or it gets stuck at the boot animation screen, then you are forced to factory reset your device. Or you need to install latest security firmware in link given above (in download area). The Factory Reset process needs to be applied by those that have installed the Android 8.0.0 Oreo firmware over custom ROMs, too. how to factory reset your device?: 1-power it off first. 2-Boot Recovery Mode manually using the phone’s hardware buttons:
3-All the options that you can use should now be listed on your phone’s screen, choose Wipe data factory reset. 4-When you’re done using the Recovery Mode you simply need to select the ‘reboot system now’ option and your Galaxy S7 Edge phone will reboot in normal mode. select ‘wipe data/ factory reset’ option. confirm process. reboot phone in normal mode after factory reset is done. Now, Enjoy your fixed Smartphone, If you need anyhelp comment I will answer. Or write a comment in my youtube chanel, I will be there for you How do I update the firmware on my Galaxy S7 edge?From the Home screen, tap the Menu Key > Settings > About phone > Software updates > Check for Updates. If your device finds a new software update, tap Download now. When complete, a screen will appear advising you that the new version of software is ready to be installed. Tap Install update.
How to flash Samsung S7 edge with Odin?Push the Firmware to your Phone. Run ODIN on your PC. ... . Connect your phone (which should be in Download Mode) to the computer. ... . Click on BL in ODIN and it will open a dialogue prompt where you must select a file that goes here.. Browse over to the folder where you extracted the firmware files.. What is the latest Android version for S7 edge?Samsung Galaxy S7. |